Procurement-Ready Selection
Part-numbered options organize key selection and ordering data in one concise catalog table.
PE heat-shrink tubing | 350003 series
PE HEAT-SHRINK TUBING Engineered for catheter laser bonding
B2B program support
Built for Engineering and Procurement Teams
Program-Specific Configurations
Nonstandard PE size and construction requests can be reviewed for custom manufacturing.
Evaluation Support
Small-quantity samples may be available for fit assessment and preliminary process trials, subject to material and production review.
Direct Technical Access
Detailed specifications and application discussions are available when your engineering team begins qualification.
MaterialPolyethylene (PE)Polyolefin family
Catalog series350003-01 to -1212 catalog sizes
Minimum expanded ID0.043-0.133 in1.09-3.38 mm
Maximum recovered ID0.012-0.040 in0.30-1.02 mm
Catalog dimensions
PE Catalog Sizes
Use minimum expanded ID for initial loading-clearance screening and maximum recovered ID for initial recovery screening.
| Cat. No. | Minimum expanded ID in (mm) |
Maximum recovered ID in (mm) |
|---|---|---|
| 350003-06 | 0.043 in(1.09 mm) | 0.012 in(0.30 mm) |
| 350003-07 | 0.060 in(1.52 mm) | 0.016 in(0.41 mm) |
| 350003-02 | 0.062 in(1.57 mm) | 0.018 in(0.46 mm) |
| 350003-05 | 0.062 in(1.57 mm) | 0.019 in(0.48 mm) |
| 350003-01 | 0.068 in(1.73 mm) | 0.021 in(0.53 mm) |
| 350003-08 | 0.082 in(2.08 mm) | 0.029 in(0.74 mm) |
| 350003-03 | 0.089 in(2.26 mm) | 0.029 in(0.74 mm) |
| 350003-10 | 0.093 in(2.36 mm) | 0.034 in(0.86 mm) |
| 350003-12 | 0.110 in(2.79 mm) | 0.039 in(0.99 mm) |
| 350003-11 | 0.120 in(3.05 mm) | 0.037 in(0.94 mm) |
| 350003-04 | 0.125 in(3.17 mm) | 0.032 in(0.81 mm) |
| 350003-09 | 0.133 in(3.38 mm) | 0.040 in(1.02 mm) |
Metric values are converted from the source inch dimensions and rounded to two decimal places. Final selection and acceptance criteria follow the applicable Polymerex quotation and order documentation.
Start Your PE Tubing Evaluation
Share your loading geometry, target recovery range and laser bonding requirements for an application-specific review.
Qualification note
Material name and catalog size do not establish a finished-device process. Confirm loading, recovery, substrate interaction and final suitability on representative parts.