up to 4:1*
Selected PET configurations support demanding diameter transitions with uniform component coverage.
PET heat-shrink tubing | 340001 series
PET HEAT-SHRINK TUBING Purpose-built for catheter manufacturing
Why PMC PET
Built around demanding catheter applications
0.00025"
Custom PET tubing with wall thickness as low as 0.00025" supports low-profile catheter assemblies with minimal material buildup.
Procurement-Ready Product Data
Structured catalog numbers, sizes and specifications simplify technical review, RFQs and repeat ordering.
Laser Bonder
PMC PET tubing is tailored for use with our catheter laser bonder as one coordinated material-and-equipment solution.
* Shrink ratio and wall-thickness availability may vary by size and must be confirmed against the final approved specification.
Catalog dimensions
PET Catalog Sizes
Published expanded ID values support initial size screening. Inch dimensions are primary; metric values are shown in parentheses.
| Cat. No. | Expanded ID in (mm) |
|---|---|
| 340001-07 | 0.033 ± 0.002 in(0.84 ± 0.05 mm) |
| 340001-08 | 0.039 ± 0.002 in(0.99 ± 0.05 mm) |
| 340001-04 | 0.045 ± 0.004 in(1.14 ± 0.10 mm) |
| 340001-09 | 0.049 ± 0.002 in(1.24 ± 0.05 mm) |
| 340001-10 | 0.059 ± 0.003 in(1.50 ± 0.08 mm) |
| 340001-01 | 0.065 ± 0.003 in(1.65 ± 0.08 mm) |
| 340001-06 | 0.067 ± 0.003 in(1.70 ± 0.08 mm) |
| 340001-11 | 0.074 ± 0.004 in(1.88 ± 0.10 mm) |
| 340001-02 | 0.075 ± 0.004 in(1.91 ± 0.10 mm) |
| 340001-12 | 0.084 ± 0.004 in(2.13 ± 0.10 mm) |
| 340001-13 | 0.094 ± 0.005 in(2.39 ± 0.13 mm) |
| 340001-14 | 0.104 ± 0.005 in(2.64 ± 0.13 mm) |
| 340001-03 | 0.113 ± 0.006 in(2.87 ± 0.15 mm) |
| 340001-15 | 0.120 ± 0.006 in(3.05 ± 0.15 mm) |
| 340001-16 | 0.130 ± 0.007 in(3.30 ± 0.18 mm) |
| 340001-17 | 0.139 ± 0.007 in(3.53 ± 0.18 mm) |
| 340001-05 | 0.160 ± 0.008 in(4.06 ± 0.20 mm) |
| 340001-18 | 0.180 ± 0.009 in(4.57 ± 0.23 mm) |
| 340001-19 | 0.190 ± 0.010 in(4.83 ± 0.25 mm) |
Cat. No. and Expanded ID reflect the confirmed PET catalog table. Final fit, tubing length and acceptance criteria are confirmed for the quoted configuration.
Discuss your PET tubing requirement
Send your target dimensions, wall requirement, assembly geometry and expected order volume for an application-specific review.
Qualification note
Published dimensions support initial size screening only. Final fit, wall definition, tubing length and thermal process settings must be confirmed using the actual assembly and intended application.